Robland LX310 / X260 / X310

Robland  X260 / X310

CE

For more than 25 years, Robland have been one of the world's most important woodworking machinery manufacturers. This experience is your guarantee of the quality of the Robland LX310 combination woodworker.

A smooth running, large capacity sliding table, supported by a telescoping arm, transforms the LX310 into a small panel saw with 1290mm crosscut capacity.

A triple motor drive system allows the sawbench, spindle moulder and planer/thicknesser to operate independently. Change-over is achieved instantly via a selection switch on the control panel. There is an extension table on the spindle table of the LX310 and also a mounting table for a power feeder. This folds away when the feeder is not required.

The optional revolving base and the wheelset make using the machine even easier.


Detail The planer table fence can also be used with the saw as both saw and planer tables are at the same height. This increases rip cut capacity to a maximum of 6000mm.
Detail The sturdy fence can be set to mitre angles up to 45 degrees and is complete with a clear scale, eccentric woodclamp and flip-over stop.
Detail The sawguard raises, lowers and tilts with the blade. They both retract fully below the table simply by sliding the table insert out. All in seconds, with no tools required.
Detail The large cast iron table slides on two 30mm bars. These bars can be repositioned along the machine frame in seconds. This allows the table stroke to be ideally positioned to suit working with the saw or spindle.
Detail The long planer tables make straightening workpieces easy. Fine adjustment of the tables is also easy thanks to the large handscrews. The planer fence is very solid and tilts with positive stops at 45 and 90 degrees.
Detail Up to 230mm thicknessing capacity with precision setting and locking. The very sturdy central column and positive feed systems ensure excellent results.
Detail Large capacities and sturdy construction ensure maximum versatility. 80mm bearing seats, a 30mm diameter spindle, and 3 spindle rings (maximum diameter of 180mm) ensure professional results. A spring loaded locking device enables quick fitting of tooling while the hood guards ensure maximum safety under all conditions. For precise easy set up, the fence features micro adjustment.
Detail Circular slides ensure smooth, easy movement of the worktable. Large travel capacities handle a wide variety of work. The lever handles are removed in seconds. In fact, the entire mortising unit is very easy to remove. This avoids any obstruction of inconvenience when using the machine's other functions.

In the standard version, the machine is equipped with the smaller sliding table. In this version the maximum crosscut is 960mm. Optionally, a larger sliding table and longer bar system is available (without telescopic arm and table extension). This increases the crosscut capacity from 920mm to 1290mm. This machine is available with a planer/thicknesser width of 310mm(X310) and 260mm (X260). Apart from this table width difference, the same technical data apply on both the X310 and X260.


Specifications

 
(L)X310
X260
Planer
Voltage
volts
220-380-single
220-380-single
Motors 3 phase
HP
3x3 or 4
3x3 or 4
Motors 1 phase
HP
3x3
3x3
Tables sizes
mm
310x1400
260x1400
Max. thickness capacity
mm
230
230
Feed speed
m/min
6
6
RPM
rpm
4500
4500
Knives
-
3
3
Saw
RPM
rpm
4000
4000
Max. depth of cut at 90 deg.
mm
85
85
Max. depth of cut at 45 deg.
mm
55
55
Saw table size
mm
800x445
800x445
Saw diameter
mm
250x30
250x30
Saw stroke LX310
mm
1290
-
Saw stroke X310,X260
mm
960
960
Spindle
RPM 3 phase
rpm
3000/6000
3000/6000
RPM 1 phase
rpm
6000
6000
Spindle diameter
mm
30
30
Spindle capacity
mm
125
125
Rise and fall
mm
140
140
Sliding table size
mm
340x370
340x370
Mortiser
RPM
rpm
4500
4500
Table size
mm
200x425
200x425
Stroke:cross in/out/up
mm
165x140x85
165x140x85
Chuck capacity
mm
0-16
0-16
Packing
Weight
kg
400
350
Case sizes LxWxH
mm
1460x1120x1100
1460x1120x1100